IPG Photonics’ HLPN-2050/2060 Holmium:YLF laser provides 10 - 500 nanosecond pulses at ~2.05 μm with pulse energies up to 80 mJ, output powers up to 80 W at repetition rates up to 40 kHz. The Q-switched Ho:YLF head is pumped by IPG’s efficient and reliable Thulium fiber laser. The HLPN-2050/2060 2.05 μm pulsed laser addresses a wide range of materials processing, scientific and medical applications.
|Output Power up to 80 W||Pulse Durations 10-500 ns|
|Pulse Energy 1-80 mJ||TEM00 Beam Mode|
|Repetition Rate up to 40 kHz|
* Nonlinear conversion to 2nd through 8th harmonics is available upon request.
|Polarization||Linear, > 500:1|
|Maximum Average Power, W||15||40||80|
|Maximum Pulse Energy, mJ||
20 (0-500 Hz)
40 (0-500 Hz)
80 (0-500 Hz)
|Pulse Width, ns||
10 - 500
|Max. Peak Power, MW||
|Repetition Rate, kHz||0 - 40|
|Output Beam Mode, M2||<1.1||<1.2||<1.3|
|Beam Diameter (FW, 1/e2), mm||~1.1||~1.3||~1.5|
|Pump Laser||50 W Tm Fiber Laser||120 W Tm Fiber Laser||(2) 120 W Tm Fiber Lasers|
|Optical Head Dimensions (W × D × H), mm||170 × 130 × 40||320 × 325 × 80||320 × 430 × 80|
|Pump Laser Cooling*||Water-cooled**|
|Optical Head Cooling||Conductive||Water-cooled***|
|Supply Voltage, Single-phase, 50-60 Hz, VAC||110-240||208-240|
* Water chiller is not included.
** Optional air-cooling is available upon request.
*** Optional air or conductive cooling is available upon request.
|Plastics Cutting & Welding||LIDAR|
|Medical Therapy, Surgery||OPO Pump Source|