ULPN-355-R, up to 30 W

Ultraviolet Pulsed Fiber Laser

IPG Photonics’ new ULPN-R Series ultraviolet nanosecond fiber lasers provide high peak power with scalable average output power up to 30 W, 1.5 ns pulse duration at full operational repetition rate range of 10 - 600 kHz. The all fiber format allows for the adjustment of pulse energy and/or pulse repetition rate without affecting any of the output beam parameters. IPG’s novel fiber laser is much more efficient and compact than conventional lasers now on the market, and is ideal for applications in the solar/photovoltaic arena, resistor trimming and marking of transparent materials. The short wavelength, short pulse duration and high peak power result in very small heat affected zone.



Wavelength 355 nm Repetition Rate up to 600 kHz
Pulse Energy > 50 µJ Record Wall-plug Efficiency
Pulse Duration 1.5 ns Air-cooled
Peak Power > 40 kW Rugged Design
Beam Quality M2 <1.8
Wavelength, nm 355 ±5
Average Power, W 30
Pulse Energy, μJ >50
Pulse Duration, ns 1-1.8
Peak Power, kW >40
Repetition Rate, kHz 10-600
Beam Quality, M2 <1.8


Control Unit Dimensions, mm 448 × 580 × 133
Optical Head Dimensions, mm 165 × 240 × 65
Cooling Water
Supply Voltage, VAC single-phase 50-60 Hz, 100-240
Power Consumption, W 380
ULPN-355-50-1-30-R Datasheet


Materials Processing Texturing
Micromachining Si Ablation
Solar/Photovoltaic Scribing
Plastics Marking

ULPN-355-50-1-30-R Optical Head

30 W opt head

For your convenience, we have sales offices in many locations. Here you can contact our Sales Force, request literature, ask us a question.