YLM and YLR CW Ytterbium fiber lasers provide from 1 to 100 W output power at 1 micron wavelength. Single-mode asers feature near diffraction-limited single transverse mode output. Multi-mode lasers offer several options of fiber core diameter, allowing optimal choice of beam parameter product for the application. Fiber delivery, wide selectivity of operating wavelengths, direct analog power modulation, low amplitude noise, record wall-plug efficiency, high stability and ultra-long pump diode lifetime complete an impressive list of advantages of these fiber lasers. The reliability of these lasers is unmatched by any solid state or gas laser system. Single-mode YLM and YLR series laser are ideally suited for scientific applications and for integration into various sensors and biomedical instruments.
Selectable Wavelength 976-1075 nm | Unique Wall-plug Efficiency |
Excellent Beam Quality | Industrial Performance |
Random Polarization | Telecom Reliability |
Air Cooled | Compact and Low Cost Design |
YLM-1 | YLM-10 | YLM-20 | YLM-30 | YLM-50 | YLM-100 | |
Central Wavelength Range*, nm | 976 - 1075 | |||||
Linewidth FWHM, nm | ≤ 1 | ≤ 2 | ||||
Mode of Operation | CW/modulated | |||||
Modulation Frequency, kHz | <2 | |||||
Maximum Average Power**, W | 1 | 10 | 20 | 30 | 50 | 100 |
Power Tunability, % | 10 - 100 | |||||
Power Stability***, % | ±1 | |||||
Optical Noise****, % RMS | < 2, typ.1 | |||||
Beam Quality, M2 | <1.1 |
* Custom central wavelengths are available upon request.
** Maximum output power may be limited by wavelength selection: 10 W for 976 nm, 30 W for 1005-1020 nm, 100 W for 1050 -1070 nm
*** Over 4 hours, T=const
**** 10 kHz to 20 MHz
Selectable Wavelength 1.03 - 1.09 μm | Unique Wall-plug Efficiency |
Excellent Beam Quality | Industrial Performance |
Random Polarization | Telecom Reliability |
Air Cooled | Compact and Low Cost Design |
|
YLR-10 | YLR-20 | YLR-50 | YLR-100 |
Central Wavelength Range*, nm | 1030 - 1090* | |||
Central Wavelength Accuracy, nm | ±1 | |||
Mode of Operation | CW/modulated | |||
Modulation Frequency, kHz | 0-50 | |||
Nominal Output Power**, W | 10 | 20 | 50 | 100 |
Power Tunability, % | 10-100 | |||
Power Stability***, % | ±2 | |||
Optical Noise, % RMS | <2 | |||
Polarization | Random | |||
Beam Quality, M2 | <1.1 |
* Custom central wavelengths are available upon request in the specified range.
1-10 W YLM and YLR lasers in 976-1020 nm wavelength range are available. Lasers in power range 1-50 W are available on special order.
**Maximum output power may be limited by wavelength selection.
Other power levels in this range are available. Please contact your IPG Representative.
Higher power YLR models up to 1000 W are available.
*** Over 4 hours, T=const
YLR-10 | YLR-20 | YLR-50 | YLR-100 | |
Console Dimensions, mm | 448 × 403 × 132 | |||
Weight, kg | <20 | |||
Cooling | Air | |||
Supply Voltage, VAC | single-phase 50-60 Hz, 110-220 | |||
Power Consumption, W | < 50 | < 100 | < 150 | < 250 |
YLM OEM modules are available upon request.
Selectable Wavelength 1.03 - 1.09 μm | Unique Wall-plug Efficiency |
Multi-mode Fiber Output | Industrial Performance |
Random Polarization | Telecom Reliability |
Air-cooled | Compact and Low Cost |
|
YLR-10-MM | YLR-20-MM | YLR-50-MM | YLR-100-MM |
Central Wavelength Range*, nm | 1030 - 1090 | |||
Central Wavelength Accuracy, nm | ±1 | |||
Mode of Operation | CW/modulated | |||
Modulation Frequency, kHz | 0-50 | |||
Nominal Output Power**, W | 10 | 20 | 50 | 100 |
Power Tunability, % | 10-100 | |||
Power Stability***, % | ±2 | |||
Optical Noise, % RMS | <2 | |||
Polarization | Random | |||
Output Fiber Core Diameter, μm | 50, 100, 200 | |||
Beam Parameter Product, mm × rad |
<2, <5, <10 |
* Custom central wavelengths are available upon request in the specified range.
**Maximum output power may be limited by wavelength selection.
Other power levels in this range are available. Please contact your IPG Representative.
Higher power models up to 4000 W are available.
*** Over 4 hours, T=const
YLR-10-MM | YLR-20-MM | YLR-50-MM | YLR-100-MM | |
Console Dimensions (W × D × H), mm | 448 × 403 × 132 | |||
Weight, kg | <20 | |||
Cooling | Air | |||
Supply Voltage, VAC | single-phase 50-60 Hz, 110-220 | |||
Power Consumption, W | < 50 | < 100 | < 150 | < 250 |
YLM-MM OEM modules are available upon request.
Fine Cutting and Scribing | Surface Patterning and Structuring |
Microwelding | Optical Trapping / Tweezers |
Engraving | Medical Instrument Integration |