GLPF and GLPP green hybrid-fiber picosecond lasers provide high peak power with scalable average output power up to 50 W and customer selected pulse durations in the range of 600 fs to 5 ps at full operational repetition rate range of 50-5500 kHz. The fiber design allows for the adjustment of peak power and/or pulse repetition rate without affecting any of the output beam parameters. IPG’s novel fiber lasers are much more efficient, compact and easy to integrate into OEM equipment than conventional lasers now on the market. They are ideal for applications in precision micromachining.
Wavelength 515 nm |
Burst Mode Option |
Output Power up to 50 W | Integrated AOM Pulse Picker |
Pulse Energy up to 50 μJ | Up to 4 m Delivery Fiber to Remote Head |
Pulse Duration Options 600 fs to 5 ps |
Cold and Warm Start in Seconds |
Repetition Rate up to 5.5 MHz | Low-maintenance Rugged Design |
Customer can select models within specified maximum power, maximum pulse energy and pulse durations in 600 fs to 5 ps range. Shorter pulse durations and higher pulse energies are available upon request. Please discuss your wavelength requirements with IPG Representative.
GLPF-100-750-25-R | GLPF-50-750-50-R | GLPP-100-1-25-R | GLPP-50-1-50-R | |
Wavelength, nm | 515 | |||
Average Power, W | 25 |
50 | 25 | 50 |
Pulse Energy, μJ | 100 | 50 | 100 | 50 |
Pulse Duration, ps | 0.6 - 0.9 | 1-5 | ||
Repetition Rate, kHz | 50-5500 | |||
Beam Quality, M2 | <1.2 |
Control Unit Dimensions, mm | 448 × 580 × 133 | |
Optical Head Dimensions, mm | 82 × 271 × 124 | |
Cooling | Water | |
Supply Voltage, VAC | 100-240, Single-phase 50-60 Hz | |
Power Consumption, W | <1000 |
Life Sciences | Microdrilling |
LED Dicing | Fine Tube Cutting |
Medical Device Manufacturing | Specialty Marking |
Solar Cell Structuring | Thin Film Ablation |
Photomask Cutting and Repair |
The excellent beam quality, ultrashort pulse duration and high pulse energy combine to provide peak power densities suitable for micromachining virtually any material: metal, glass, ceramic, silicon, plastics. The ultrashort pulse duration results in a very small heat affected zone.