IPG Photonics GLPF-10-500-20-R green femtosecond fiber laser provides pulses with 10 μJ pulse energy with scalable average output power of 20 W and customer selected pulse durations in the range of 250-500 fs at full operational repetition rate range of 100-2000 kHz. The all fiber format allows for the adjustment of peak power and/or pulse repetition rate without affecting any of the output beam parameters. IPG’s novel fiber laser is much more efficient and compact than conventional lasers now on the market. It is ideal for applications in life sciences and precision micromachining.
| Wavelength 515 nm | Pulse Duration 250-500 fs |
| Pulse Energy up to 10 μJ | Repetition Rate up to 2 MHz |
| Output Power >20 W |
Low Maintenance, Rugged Design |
| GLPF-2.5-500-5-R | GLPF-5-500-10-R | GLPF-10-500-20-R | |
| Wavelength, nm | 515 | ||
| Average Power*, W | 5 | 10 | 20 |
| Pulse Energy*, μJ | 2.5 | 5 | 10 |
| Pulse Duration*, fs | 250-500 | ||
| Repetition Rate, kHz | 10-2000 | ||
| Beam Quality, M2 | <1.2 | ||
* Customer can select models within specified maximum power, maximum pulse energy and pulse durations in 250 to 500 fs range. Shorter pulse durations and pulse energies are available upon request. Please discuss your wavelength requirements with IPG Representative.
| Control Unit Dimensions, mm | 448 × 580 × 133 | ||
| Optical Head Dimensions, mm | 75 × 268 × 118 | ||
| Cooling | Water | ||
| Supply Voltage, single-phase 50-60 Hz, VAC | 100-240 | ||
| Power Consumption, W | 100 | 150 | 300 |
| Life Sciences | Photomask Cutting and Repair |
| LED Dicing | Fine Tube Cutting |
| Medical Device Manufacturing | Specialty Marking |
| Solar Cell Structuring | Thin Film Ablation |
| Microdrilling | |