Optimized Ultra-Long-Haul (ULH) Optical Amplification

Optimized ULH Optical Amplification Solutions
Compact ULH System

The 2 Rack Unit (RU) version of the ULH system is an economical companion to the 8RU, 16 Input/Output (I/O) slot shelf. This compact shelf has 4 I/O card slots and accommodates any combination of 4 ULH I/O blades including transponders (2.5G multi-rate, 10G and 40G) and optical amplifiers (pre-amplifiers, booster amplifiers, Raman signal amplifiers and optical pumps for EDFA-based Remote Optically Pumped Amplifiers.)

The shelf is equipped with two load-sharing power supplies and a control unit (CU). The CU provides status monitoring, control and adjustment of the installed blades and hosts the SNMP Management Information Base (MIB) for the system. The 2RU ULH shelf is ideally suited to very long distances in single-channel optical transmission applications including high voltage electrical power, transportation and pipeline telemetry networks. Up to 90 dB of optical budget can be supported in this compact configuration.

Compact ULH System

Datasheet:
Optimized ULH Optical Amplification

White Paper (new) now available:
"Repeaterless Optical Telemetry Applications"

 Main Features:

Applications:

    • Up to 90 dB of Optical Budget in a Compact 2RU Shelf
    • STM-1/OC-3, STM-4/OC-12, STM-16/OC-48 Rates Supported
    • >300 km/ 185 miles without Repeaters
    • Supports any Mix of ULH blades, from 40G transponder to ROPA Signal Pump
    • CLEC, Electric Utility, Electric Power Transmission, Transportation, Pipeline & Private Networks
    • SCADA & Telemetry Transport
    • Metro Network Backhaul


      Optimized ULH Optical Amplification Solutions
      1 RU Pre-amp & Booster

      A stand-alone Pre-amp & Booster chassis is also available that supports up to 60 dB optical budget for legacy or 3rd party optical transmission platforms. A 200 mW booster amplifier is paired with a pre-amp with -38 dBm receive sensitivity in a small 1 RU (1.75” or 43.7mm vertical rack space) package that mounts in a 19” (478 mm) equipment rack.

      Contact IPG Photonics to Transform your system today.

      1 RU Pre-amp & Booster

      Datasheet:

      Optimized ULH Optical Amplification

       Main Features:


      • Up to 60 dB optical budget supported from 1 RU


      Contact IPG Photonics

      Mark Cannata
      Director, Sales & Marketing Communications
      mcannata@ipgphotonics.com; Direct: (508) 373-1340