Complex Shape Laser Welding


Gantry type laser welding station is intended for realization of linear welded joints for different materials (low carbon and carbon steels, copper, titanium, aluminium, and stainless alloys) of high thickness (up to 100 mm).

Process simplicity saves both filler wire and base material as well as enables the station application in different industries.

It is possible to control weld seam quality after each welding pass. Post-welding residual stress is minimal due to precise control of applied energy.



Welding of thick materials (up to 50 mm)

Filler wire and base metal savings compared to an arc welding (by a factor of dozens)

Strict control of welding process and weld seam quality Process simplicity

Minimal thermal exposure and, therefore, minimal structure distortion

High process accuracy and repeatability
Fiber laser output power, kW up to 50 kW
Welding rate, m/min 0.1 to 10
Thickness of welded parts, mm 1 to 100
Filler wire diameter, mm 0.8 to 1.6
Wire feed rate, m/min up to 10
Wire feed mode Continuous/pulse
Transmitting fiber diameter, μm 50 / 100 / 200
Possibility of inert gas welding Yes
Number of axis 3
Working area, mm 1,500 х 1,000
Positioning repeatability ± 0.1 mm/m
Required contour repeatability ± 0.025 mm
Machine footprint, mm 9,000 х 11,000

Area of linear axes travel (incl. programmed limitations), mm

X ± 1,200
Y ± 350
Z ± 250

Gantry power supply

380 V (± 5 %), 50 Hz, 3 phases, GOST 13109-97

• IPG fiber laser
• IPG laser cooling system
• IPG optical welding head
• Wire feeder
• Filter ventilation unit
• Laser Weld gantry
• Voltage stabilizer
• Protective enclosure (for personnel protection against scattered laser radiation)


Aircraft industry
Automotive industry
Shipbuilding industry
Space industry
Chemical industry
For your convenience, we have sales offices in many locations. Here you can contact our Sales Force, request literature, ask us a question.