StandardCompactMicro

Multi-axis Laser Cutting

LaserCut 4-Axis: Standard, Compact and Micro

The 4-Axis Workcells are highly cost-efficient 2D and 3D CNC cutting tools for both prototype and high-volume production environments. With rugged industrial construction, these system are designed for thermal and mechanical stability. High-accuracy linear-drive motors and low-mass cutting heads are optimized for the rapid motions associated with small-part machining. The standard LaserCut Multi-axis is configured with enhanced accuracy stages up to 500 mm travel, while the LaserCut Multi-axis Compact and LaserCut Micro systems provide motion system options at a lower cost-point for less demanding applications. Custom configurations with additional motion axes can be quoted upon request.

3D

Features

Fiber Laser Cutting for High Efficiency and Low Operating Costs
Granite Superstructure for High Stability
Work Envelope X: 500 mm Y: 300 mm Z: 300 mm CDRH Class 1 Laser Safety Enclosure
G/M-code Programming, Full Look-ahead Contouring Capability Configurable with a Variety of IPG Lasers
Standard X-axis Rotation, Additional Axes Optional Configurable for High Volume Production
Sealed Stages with Purge to Extend Life Designed, Built and Supported by IPG
  LaserCut 4-Axis LaserCut 4-Axis Compact
Laser Power Up to 2000 W CW
2,000/20,000 W QCW
Up to 500 W CW
300/3,000 W QCW
Beam Delivery Options

IPG Photonics’ FLC-D30 Cutting Head
IPG Photonics’ FLC-Microcutting Head

Work Envelope, X × Y × Z, mm

500 × 300 × 300

300 × 300 × 300

Maximum Speed, X/Y mm/s

Z, mm/s

1000

400

100

100

Accuracy

X/Y ±8 µm        Z  ±25 µm

X/Y ±2 µm       Z  ±3 µm

X/Y ±25 µm       Z  ±25 µm

X/Y ±3 µm         Z  ±3 µm 

Motion Platform

Split X/Y Stages
High-force Direct-drive Linear Motors
Ball-screw Drive
50 nm Resolution Linear Encoders
Air-purge to Reduce Contamination

Materials

Stainless/ Mild Steel, Aluminum, Brass,
Copper, Laminated Foils, Polymers

Controls/ Interface

Industrial Motion Controller, Full Look-ahead Contouring Capability
Laser Power Proportional to Velocity, Windows-based CNC Interface
G/M-code Programming, Editable Materials and
Laser Parameter Database
Optional CAD/ CAM Package with Nesting Feature

Process Gas

Options: Electronic High-pressure (300 psi) Regulator for Cutting
Inputs for Two Cutting Gasses for Easy Material Changeover
Gases Programmable via G/M-code

Tooling

Aluminum T-slot Table
Optional 4th axis with 5C Collet or 3-jaw Chuck
Optional Cutting Table with Honeycomb Inserts
Optional Pass-through for Roll-feed Applications Available

Safety CDRH Class I Laser System
(Complies with 21 CFR Chapter 1, Subchapter J)
Exhaust 4” Blast Gate with Exhaust Plenum for Cutting Box and Debris Drawer

Dimensions, L × W × H, mm
in.

1600 × 1300 × 2200
63 × 51 × 88

1170 × 810 × 2005
46 × 32 × 79

Weight, kg

1600 kg (3530 lbs.) 

Power

208-230 or 380-480 VAC, 47 to 63 Hz, 3 PH, 30 A

 

Close
Multi-axis Workcell DatasheetStandard

Features

Choice of Lasers Optimized for Penetration of Reflective Materials
Work Envelope (standard) X: 250 mm  Y: 250 mm  Z: 200 mm
Rotation About X-axis is Standard;  Additional Axes Optional
G/M code Programming, Full Look-ahead Contouring Capability
Designed, Built and Supported by IPG
  LaserCut 4-Axis Compact
Laser Power Up to 1000 W CW
up to 450/4500 W QCW
Beam Delivery Options

IPG’s FLC-D30 or FLC Microcutting Head Includes Off-axis Viewing System

Work Envelope, X × Y × Z, mm

250 × 250 × 200

Maximum Speed, X/Y mm/s

Z, mm/s

100

100

Accuracy

X/Y ±25 µm       Z  ±25 µm

X/Y ±3 µm         Z  ±3 µm 

Motion Platform

Split X/Y Stages
High-force Direct-drive Linear Motors
Ball-screw Drive
50 nm Resolution Linear Encoders
Air-purge to Reduce Contamination

Materials

Stainless/ Mild Steel, Aluminum, Brass,
Copper, Laminated Foils, Polymers

Controls/ Interface

Industrial Motion Controller, Full Look-ahead Contouring Capability
Laser Power Proportional to Velocity, Windows-based CNC Interface
G/M-code Programming, Editable Materials and
Laser Parameter Database
Optional CAD/ CAM Package with Nesting Feature

Process Gas

Options: Electronic High-pressure (300 psi) Regulator for Cutting
Inputs for Two Cutting Gasses for Easy Material Changeover
Gases Programmable via G/M-code

Tooling

Aluminum T-slot Table
Optional 4th axis with 5C Collet or 3-jaw Chuck
Optional Cutting Table with Honeycomb Inserts
Optional Pass-through for Roll-feed Applications Available

Safety CDRH Class I Laser System
(Complies with 21 CFR Chapter 1, Subchapter J)
Exhaust 4” Blast Gate with Exhaust Plenum for Cutting Box and Debris Drawer

Dimensions, L × W × H, mm
in.

1170 × 810 × 2005

46 × 32 × 79

Power

208-230 or 380-480 VAC, 47 to 63 Hz, 3 PH, 30 A

The Laser Cutting Workcell can be custom-configured by IPG to include additional rotary axes and

part handling capabilities. Please consult IPG for custom-designed laser welding solutions.

Compact

4-Axis Compact Laser Processing Workcell

Features

3-axis Part Movement

Automatic Vertically Opening Door

IPG's Versatile YLS-150/1500-QCW Fiber Laser

Synchronized X-Y & Rotation Axes

CDRH Class 1 Laser Safety Enclosure

Optional High-Performance Stages

Choice of Process Heads: Cutting, Welding & Wobble
Laser Power Options, W

YLS-150/1500-QCW

Beam Delivery

IPG’s FLC-D30 or FLC Microcutting Head Includes Off-axis Viewing System

Work Envelope,

X:Y:Z, mm, in.

100 x 100 x 100
4 x 4 x 4

X-Y-Stage Travel

X: 100 mm, 4 in., Y: 100 mm, 4 in.
Accuracy: ±30 μm (1.2 mils); Repeatability: ±5 μm (0.2 mils); Velocity: 25 mm/sec (60 in/min)

Z-Stage Travel

Z: 100 mm (4”)
Accuracy: ±24 μm (1.0 mils); Repeatability: ±3 μm (0.12 mils); Velocity: 100 mm/sec (236 in/min)

Tooling Aluminum T-slot Table

Rotation Stage
(X-axis):
Gear Drive

Travel: 3600 Continuous, Speed: 30 rpm max; Accuracy: ±180 arc-sec
Repeatability: ±45 arc-sec
5C Collet, 3 Jaw Chuck

Controls/ Interface

Industrial Motion Controller with G/M-code Programming
Laptop Computer via USB Interface
Front Panel Controls for Cycle Start/Stop, Reset, Emergency Stop & Laser Enabling Key

Process Gas

Computer Controlled Pressure Regulator Solenoid Valve & Flow Switch for Two Process Gases

Exhaust 4” Blast Gate with Exhaust Plenum for Optional Welding Table
Safety CDRH Class I Laser System (Complies with 21 CFR Chapter 1, Subchapter J)

Dimensions, L×W×H, mm

in.

900 x 420 x 1260

36 x 16.5 x 49.6

Micro

Micro-Multi-axis Laser Processing Workcell

Applications

Planar 2D or 3D Part Cutting Works on many materials
Small Part Machining Tubing cutting
Medical Device Manufacturing
Compact Multi-axis Sysyem
 
 
Micro Multi-Axis System
 
CONTACT US
For your convenience, we have sales offices in many locations. Here you can contact our Sales Force, request literature, ask us a question.